Follow these 7 steps from our Toughbook technicians, with a photo of each one, or watch the video.
What you'll need
- Flat-head screwdriver or any pry tool
Before you start: shut down the computer, unplug the AC adapter and remove the battery.
Watch the video
Install SSD
Steps
-

1Remove the HDD caddy
Push up on the lock on the bottom of the unit to release the caddy, then slide it out.
-

2Open the locking clips on the sides of the caddy
Use a flat-head screwdriver or a pry tool.
-

3Gently open the caddy and remove the HDD
The HDD will be in a protective sleeve.
-

4Remove the sleeve and gently detach the ribbon cable
Pull from the base of the cable to avoid damaging it.
-

5Insert the ribbon cable into the new SSD
The ribbon is size-specific; do not force it.
-

6Insert the SSD back into the sleeve
Leave the ribbon hanging out of the sleeve.
-

7Reassemble the caddy
Connect the two halves and make sure the side locks click into place. Reinsert the caddy into the laptop.
Stuck, or not sure a part fits your unit? Ask our technicians; we support every Toughbook we sell. Need memory, a drive, a keyboard or a battery? Request a quick quote.
More on the Panasonic Toughbook CF-74: SSD / Hard Drive.