Follow these 13 steps from our Toughbook technicians, with a photo of each one, or watch the video.
What you'll need
- Phillips-head screwdriver
- Pry tool
- Double-sided adhesive
Watch the video
Change standard keyboard
Steps
-

1Disconnect all power sources
This includes the AC adapter and the battery.
-

2Disconnect the back of the keyboard bracket
Push and pull away. You will hear a click and feel the bracket disconnect.
-

3Gently remove the keyboard bracket
Use a pry tool to lift the bracket up, then push it forward to release it.
-

4Remove the 4 screws from the keyboard fasteners
Use a Phillips-head screwdriver.
-

5Gently remove the keyboard as flat as possible
Do not over-bend the keyboard. Apply heat if needed to loosen the adhesive.
-

6Gently remove the protective film
Use any tool. Applying heat may loosen the adhesive if needed.
-

7Unlock the keyboard ribbon locks
Use any tool; a pry tool is recommended.
-

8Insert the ribbons from the new keyboard into the ribbon locks
The ribbon locks are size-specific. Insert each ribbon into the correct lock.
-

9Reapply the protective film
Apply new adhesive if needed.
-

10Apply double-sided adhesive
Apply as much as necessary.
-

11Make sure the keyboard is firmly taped down
Apply more adhesive if necessary.
-

12Reattach the keyboard fasteners
Use a Phillips-head screwdriver.
-

13Reassemble your laptop
Put the keyboard bracket back in its original position.
Stuck, or not sure a part fits your unit? Ask our technicians; we support every Toughbook we sell. Need memory, a drive, a keyboard or a battery? Request a quick quote.
More on the Panasonic Toughbook CF-74: Keyboard Types.